A Single Bracket to Relocate Your 3rd Brake Light, Mount Off-Road Lights, and Relocate Your License Plate

2007 – 2018 JK and JKU

The JKRLB is designed to exactly fit 2007-2018 Jeep Wranglers (2 or 4 door).  This mounts inside the spare tire well using new extended lug nuts.  This bracket is constructed out of sturdy, American, cold-rolled steel covered in a durable textured powder coating.

2018 – Present JL and JLU

The JLRLB is designed to exactly fit 2018 – Present JL Jeep Wranglers (2 or 4 door).  This mounts inside the spare tire well using new extended lug nuts.  This bracket is constructed out of sturdy, American, cold-rolled steel covered in a durable textured powder coating.

2007 – 2018 JK and JKU

3rd Brake Light Relocation

Simply unplug your factory 3rd brake light, saw it off right below the red colored portion and screw it onto the JKRLB using the supplied blackout screws.

2018 – Present JL and JLU

3rd Brake Light Relocation

Simply unplug and unscrew your stock 3rd brake light and install it onto the JLRLB with no modifications.  You can re-use the screws from your factory light or use our blackout screws (included).

2007 – 2018 JK and JKU

Rear-Facing Offroad Light Mounts

This bracket can accommodate 2 rear-facing offroad lights (we suggest purchasing lights with a quick release system).  This is shown with a 3″ square LED light.  The bracket will accommodate lights with a maximum height of 3.5″  before it obstructs the 3rd brake light. If you are using this without the 3rd brake light, any size light will fit.

2018 – Present JL and JLU

Rear-Facing Offroad Light Mounts

This bracket can accommodate 2 rear-facing offroad lights (we suggest purchasing lights with a quick release system).  This is shown with a 3″ square LED light.  The bracket will accommodate lights with a maximum height of 4.5″  before it obstructs the 3rd brake light. If you are using this without the 3rd brake light, any size light will fit.

2007 – 2018 JK and JKU

License Plate Relocation

So many people dislike the license plate in the back corner….problem solved.  

2018 – Present JL and JLU

License Plate Relocation

We know you want a new bumper, but you don’t know what to do with your plate….problem solved.

Hardware

  • Two extended lug nuts (gloss black) to mount the bracket

  • Two black steel bolts to mount the bracket

  • Two blackout screws to mount the 3rd brake light

  • Two license plate screws

  • Two license plate washers

  • Two licenses plate jam locknuts with nylon inserts)

Literally hundreds of hours and over 50 prototypes later, we have an simple, elegant, fit-for-purpose bracket.  Made in America with 3/16th inch thick, ASTM A36 Carbon Steel.  Powedercoated in matte black.

This bracket will last you a lifetime.

2007 – 2018 JK and JKU

Specifications & Drawings

2018 – Present JL and JLU

Specifications and Drawings

Measurements

  • The diameter of the offroad light mounting hole is 0.375″ inches

  • The distance from the center of the offroad light mounting hole to the back wall of the bracket is 1.88″ inches

  • The distance between the 2 offroad light mounting holes is 8 5/8′ inches from center to center (maybe you want a light bar here??).

  • The bolt holes (to mount to the extended lugs nuts) are oval so they can accommodate 5×4.5, 5×5, 5×5.5 and 5×6 bolt patterns (which means that this bracket will fit a CJ, TJ, YJ, etc…although this is not specifically designed for these jeeps).

Install Guide

Videos

Available, get it now online!

Order now!

Find your store

Sed non mauris vitae erat consequat bibendum tasociosqu ad litora torquent.

View Locations

Free Shipping

Sed non mauris vitae erat consequat bibendum tasociosqu ad litora torquent.

Learn more